4
OPERATION INSTRUCTION
1. Check and make sure that your hands are dry before
operate, then connect the appliance with power source.
3. Remove the water flosser from the charger, then insert the
nozzle into the body. And you can press the nozzle release
button if need to remove the nozzle.
4. Load the water tank with water by following the two ways as
below:
4.1 Open the water tank door and hold the water tank
horizontally, then load the water tank with water, after it, close
the water tank door.
2. Insert the body into the charger, the charging indicator blinks
and it will keep blinking during charging. When the water flosser
is charged well, the charging indicator will light solidly. It takes
about 24 hours to make the water flosser be charged fully.
NOTE:The water flosser needs to be charged if the charging
indicator blinks before or after operating.
