decakila KUJB006M, Руководство пользователя

Страница: 10 / 12

08
CHOPPING OPERATION
Place the prepared chopping food into the bowl.The food
must be cut into small size firstly(such as 2cm*2cm*6cm for
beef).
NOTE: The appliance allows you to chop the maximum
quantity of beef or meat is 150g. Select the highest speed
and operate for 60s.
• For best circulation of food that are to be blended with some
liquid, pour the liquid into the jar first, then add solids.
• Some of the tasks that cannot be performed efficiently with
a blender are: beating egg whites, whipping cream, mashing
potatoes, grinding meat, mixing dough, extracting juice from
fruit and vegetable
• The following items should never be placed in the unit as
they may cause damage: bones, large pieces of solid, frozen
food, or tough foods such as turnips.
• To crush ice, Not more than 180g ice cubes.
CARE AND CLEANING
This product contains no user serviceable parts. Refer
service to qualified service personnel.
• Before cleaning, unplug the blender.
• Always wash immediately after use for easier cleaning.
Don’t let food dry on the jar assembly as this will make
cleaning difficult.
• Pour a little warm soapy water into the jar and turn the
knob to P position for a few seconds. And then empty the
jar.
• Dismantle all detachable parts. Lift the jar assembly off
the motor unit, To detach the blade assembly by turning it
clockwise from
the jar base bottom , and remove the seal ring 2 and blade
assembly (see fig.8). In addition, detach the jar cover seal
ring 1 from the jar cover.
• Rinse the measure cup, lid, seal ring 1, jar, seal ring 2 and
blade assembly by hands or in a dishwasher and then dry.
They are dishwasher safe components, but the temperature
setting shall not exceed 70
℃
.
• Brush the blade clean using warm soapy water, then rinse
thoroughly under the tap. Don’t touch the sharp blades,
handle carefully. Leave to dry upside down away from
children.
• Wipe the motor unit with a damp cloth and dry thoroughly.
Remove the stubborn spots by rubbing with non-abrasive
cleaner. If liquids spill into the motor unit; first unplug the
unit, then wipe with a damp cloth and dry thoroughly.