background image

06

• Restart the unit and repeat the steps of 4-5 at least 3 times.

• Then turning the steam knob to         position to brew until no descaler is left.

• Then brewing coffee (no coffee powder) with tap water in the MAX level, repeat the steps of 4-5 for 3 times (it is not necessary to 

wait for 15 minutes in step of 5), then brewing until no water is left in the tank.

• Repeat the step of 8 at least 3 times to make sure the piping is cleanly.

TROUBLE SHOOTING 

Symptom

Cause

Corrections

Carafe leakage water or water leaks out 

from lid of carafe

The carafe is not located properly

The water level in the tank should be 

within the scale of MIN and MAX.

The level of water in the tank exceeds the 

scale of MAX.

 The metal parts in the tank have rust.  

The descaler is not recommended type. It 

may corrode the metal parts in the tank.

Use the descaler recommended by 

manufacturer.

Water leaks from the bottom of coffee 

maker.

There is much water in the drip tray.

Please clean the drip tray.

The coffee maker is malfunction.

Please contact with the authorized service 

facility for repairing.

Water leaks out of outer side of filter.

There is some coffee powder on filter 

edge.

Get rid of them.

Содержание KUCF007W











Отзывы: