Testing
29
2.3 Testing the LAT
The LATCP utility allows you to control and obtain information from the
LAT port driver (LTDRIVER). Using the LATCP, you can do the following:
•
Start and stop the LAT port driver.
•
Specify configuration characteristics for your service node and its
services.
•
Modify and display configuration characteristics.
•
Show system counters on the host computer.
To enable LATCP on a VMS system, enter one of the following commands:
$ MCR LATCP
or
$ RUN SYS$SYSTEM:LATCP
The application displays the
LCP>
prompt.
Examples
•
The following command shows the server characteristics for two
terminals:
LCP> SHOW SERVER
LCP Server Characteristics for LAT_08002B12D6FD
Ethernet address = 08-00-2B-12-D6-FD
Server is active
Active users = 1
Link name = LAT$LINK
LCP Server Characteristics for LAT_08002B11D26E
Ethernet address = 08-00-2B-11-D2-6E
Server is active
Active users = 4
Link name = LAT$LINK
•
The following command shows the port characteristics for a node
named TRACKS:
