Dean MF-90/110, Руководство по установке и эксплуатации

Страница: 19 / 34

MF90 SERIES PORTABLE FILTRATION SYSTEMS
CHAPTER 4: FILTER OPERATION
4-6
4.5 Unit Operation
1. When filtering, follow these steps:
2.
Follow the appropriate Sections 4.3 and 4.4 to prepare the filter unit for operation.
3.
Position the filter unit under the fryer drain valve extension for gravity drain, or near the fryer for
"suction" operations if the unit is an "AU" unit. On "AU" units, ensure the wand filter screen is
screwed securely onto the wand end, prior to pumping oil/shortening out of fryer.
4.
Turn the fryer main power switch to the "OFF" position.
DANGER
Do not leave filter unit unattended during the filtering operation. Pressurized oil
moving through the lines can cause the flexible return hose and wand assembly to
pop loose and spray hot oil.
Avoid spilling hot oil onto floor surfaces. When draining fryer into filter, never
exceed the maximum capacity of the filter pan.
5.
Open the fryer door and ensure the filter is in the proper position under the fryer drain valve
extension ("U" units- see photo below), or close to the fryer ("AU" units). Lock rear casters to
prevent filter movement during the filtering process.