background image

 

MF90 SERIES PORTABLE FILTRATION SYSTEMS 

CHAPTER 2:  IMPORTANT INFORMATION 

 

 

2-3

 

2.4  Unpacking the Filter System 

 

Ensure the container is upright.  Unpack the filter carefully and remove all accessories from the 
carton.  Do not discard or misplace parts and/or accessories; they will be needed for filter setup 
and operation.  Any accessories or starter kits included with the unit will be packaged inside 
the filter tank. 

 

 

After unpacking, immediately check the equipment for visible signs of shipping damage.  If 
such damage has occurred, contact the carrier and file the appropriate freight claims.  Do not 
contact the factory, as the responsibility of shipping damage is between the carrier and dealer 
or end-user. 

 

If your equipment arrives damaged: 

 

a.

 

File claim for damages immediately – Regardless of extent of damage. 

 

b.

 

Visible loss or damage – Be sure this is noted on the freight bill or express receipt and is 
signed by the person making the delivery.  

 

c.

 

Concealed loss or damage – If damage is unnoticed until equipment is unpacked, notify 
freight company or carrier immediately, and file a concealed damage claim.  This should be 
done within 15 days of date of delivery.  Retain the shipping container for inspection. 

 
 

NOTE:  Dean does not assume responsibility for damage or loss incurred in transit.   

 

 
 
 
 
 

Содержание MF-90/110



































Отзывы: