3-3
3.3 Leveling the Fryer (cont.)
Rigid Casters (Only)
1.
Install the rigid casters on the fryer rear channel only. Legs must be installed on the front
channel.
2.
There are no level adjustments for the rigid casters.
B.
If the floor is uneven or has a decided slope, place the fryer on a smooth platform.
C.
If the fryer is moved, re-level the fryer following the instructions given in Steps 3.3.A-C.
D.
A fryer must be restrained to prevent tipping when installed in order to avoid the splashing of hot
liquid. Restraints used can be straps or chains anchored to an immovable object (wall, floor
anchor), or may be the manner of installation (installing the fryer in an alcove, battering to other
appliances, etc.).
E.
Installing Optional Swivel Casters
:
1.
Install non-locking casters only at the rear of the unit.
2.
Locking casters must be installed at the front of the unit. Locking casters allow the fryer to
be "locked" in position for safe operations.
3.
Follow the same instructions for leg installations as given above in steps 3.2, B1-5.
1/4-20 x 3/4 Hex Bolt
1/4-20 Hex Head Locknut
Washer
Leg Support Assembly
Front Channel or
Rear Channel
1/4-20 x 3/4 Hex Bolt
Front Channel
or Rear Channel
Front or Rear Leg with
Mounting Plate
Adjust as needed
Front View
Rear Side View
Rear Caster—5" Rigid
Optional Caster-
Rear Only
Front Caster—5" Swivel
w/Brake
Optional Caster-
Front Only
ANSI Z83.11a-(Latest Edition) requires a fryer be restrained to prevent tipping when installed
in order to avoid the splashing of hot liquid. The means of restraint may be the manner of
installation, such as connection to battery of appliances or installing the fryer in an alcove, or
by separate means, such as adequate ties.
A bracket has been provided on the fryer back panel for
this purpose.
Leg and Caster (Optional) Mounting Installation
