Deagostini ModelSpace Hummer H1, Инструкция по сборке

Страница: 8 / 24

HUMMER H1: STEP BY STEP
6
11
22
44
66
33
55
Place one of the hood hooks into the oval hole in the
hood, inserting the projection into the hole (circled) of the
radiator cover.
Fit the radiator cover into the opening in the center of the hood,
from the underside.
Secure the radiator cover with masking tape to prevent it
from moving.
Fit the second hook on the other side of the hood. If the hooks
are inserted too forcefully, the temporarily fitted radiator cover
may come loose, so support the cover from behind while fitting
the hooks.
Align the pins on the underside of the gasket with the holes in
the hood.
Prepare the air filter gasket. The correct
orientation for this part is with the longer side
toward the front of the hood.
Installing the radiator cover
Tip
Remove any burrs
from the part with
a knife before
fitting.