Deagostini MODEL SPACE Honda CB750 FOUR Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 20

Deagostini MODEL SPACE Honda CB750 FOUR Скачать руководство пользователя страница 12

Pillion footrest bracket
Pillion footrest
Pillion footrest pivot
Pillion footrest rubber
Screw hole cover (left)
Screw hole cover (right)
Screws (type P) × 2

The left pillion

footrest

Phillips screwdriver
Pliers
Masking tape
Tweezers
Multi-purpose adhesive

Main frame assembly (Stage 73)

Place the left and right screw hole covers
in front of you, as shown, with the letters
‘L’ and ‘R’ the right way up. Locate the
cutouts (green lines).

Locate the screw hole behind the front
left indicator, and look for the projection
outlined above in green. Its shape
matches that of the cutout in the left
screw hole cover.

Using tweezers, hold the left screw hole
cover next to the hole and align the
cutout and projection.

Push the cover into place in the screw
hole. If it doesn’t stay in place, remove
it and apply a little multi-purpose
adhesive to the edge of the hole, then
replace it.

Stage 74

Tools

Prepare

Your parts

1

2

3

4

364

Honda CB750 FOUR:

Assembly Guide

«
...
10
11
12
13
14
...
»

Содержание MODEL SPACE Honda CB750 FOUR





















Отзывы:

Нет отзывов