de Wijs 2007, Руководство пользователя

Страница: 6 / 13

6
At the right you see an illustration of the dipswitch.
The black square marks the position of the switch.
Mode 1:
After the pre-set shut-off time, the lamp turns off and the viewer stays at
this slide.
Mode 2:
After the pre-set shut-off time, the lamp turns off and the drum revolves
to slide number 1.
Mode 3:
The lamp is always on, after the shut-off time the viewer stays at the
current slide.
Mode 4:
The lamp is always on, after the shut-off time the drum revolves to slide
number 1.
- You can adjust the shut-off time of the lamp by turning with a screwdriver the knob beside
the small switches inside the viewer. Turning counter clockwise will increase the time,
turning anticlockwise will decrease it.
4. External control (with PC)
In this situation, the rotary viewer is able to operate according to a
configured program with audible explanation of the slide. An IBM
compatible PC is required to work with the accompanied software of the
rotary viewer to control the rotary viewer.
4.1 Setting up the equipment and cable connections
List of materials:
−
10 slide Rotary viewer of ‘de Wijs’ model 2003
−
One 12 Volts dc adapter for the rotary viewer.
−
Language panel (if you need it).
−
1 Euro connector power cables for the computer
−
1 parallel extension cable with a male D25 and female D25 plug.
−
An IBM compatible x86 computer with at least 1 free parallel printer port connector and
CD-ROM player, complete it with the usual keyboard, monitor, etc. (mouse not necessary)
− 3.5” Boot disk for the rotary viewer.
− An audio cable with 2,5 mm stereo jack to double cinch or headphones.
Connect all cables according to the connection diagram (chapter 6.2).
Set the small switches at the back of the rotary viewer according to the
picture on the right.
For more information about the how to configure the computer and to make audio tracks,
take a look at the software manual that can be downloaded at
www.dewijs-3d.com at the
technical support download page.
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4