1
SAFETY INSTRUCTIONS
Do not
: Attempt to use the heater in high rise flats, basements, bathrooms or bedrooms.
Do not
: Use any other gas except Butane or Propane.
Do not
: Attempt to clean the heater until it is turned off and fully cooled.
Do not
: Use naked flame to detect suspected gas leaks.
Do not
: Allow children or pets to play near the heater.
Do not
: Twist the flexible gas hose.
Do not
: Touch the glass panel or front and sides of the unit while the heater is operating.
Warning:
Never attempt to light the unit if the hose is loose or damaged in any way. Also never attempt to
light the unit if you have reason to believe that the unit may be leaking gas. In the event of a
gas leak turn off the gas supply at the cylinder and have the unit fully checked by a competent
person in accordance with the instructions enclosed. We recommend servicing once a year.
Should you need to change the gas bottle, confirm that the gas supply is turned off at the
cylinder and that there are no sources of ignition near before proceeding.
Do
: Place heater on a flat, level and solid surface at all times.
Do
: Leak test the unit after long periods of storage.
Do
: Wait for 3 minutes before relighting, if the burner flame becomes extinguished during use.
Do
: Ensure that all naked flames are extinguished before fitting a new cylinder.
Do
: Store gas cylinders outdoor, above ground level in a safe and secure environment.
Do
: Make sure that the gas supply at the gas cylinder is turned off after use.
Do
: Ensure that servicing of the unit is carried out by a competent person in accordance with the instructions enclosed.
Do
: Allow the unit to cool down for one hour before touching the front or sides.
Always
:
Follow any safety instructions supplied with gas cylinders.
Always
:
Keep unit well away from glass doors and windows to ensure no possibility of heat build up and damage.
Always
:
We recommend servicing once a year or after a prolonged period of non-use.
Always
:
Ensure that there is no blockage of airflow. For example sooting and poor burning can be caused by dirt,
insects, cobwebs, blocking the airflow to/in the burner.
Cleaning
: Abrasive cleaners are not to be used. Clean unit with a damp cloth when fully cooled.
This unit is designed for use with a 7kg or 15kg (UK) and 13kg cylinder (Eire)
Fit Glass Panel in place as shown. Secure in
position with fixings as shown.
Fit back door onto the brackets as indicated above.
NOTE
:
Door can be adjusted to fit either a big or small gas
cylinder.
NOTE
:
When fitting gas regulator to the cylinder ensure
that the regulator is in the off position.
To fit battery unscrew ignition button and place
battery in housing. Refit ignition button securely.
Remove the glass panel and
place the coals in position as shown above.
ASSEMBLY INSTRUCTIONS - IN 3 EASY STEPS
If you require any further assistance please do not hesitate to contact us directly
on our helpline: 00 353 1 823 9200
