DE-STA-CO MDE Series, Руководство по установке

Страница: 26 / 62

25
Transport
Transportation Outside of Packaging

EQUIPMENT:

Lifting straps/chains

Metric eyebolts

Forklift/Crane

Proper PPE: gloves, glasses, footwear

Level

PREPARATION:
01.
Carefully unpack the unit making sure to preserve packaging.
02.
Review and verify contents comply with the packaging list.
03.
Inspect and document key unit areas for damage or leaks.

EXECUTION:
04.
Place eye-bolts in lifting holes (FIG. X); firmly screw into
place.
05.
Attach lifting straps/chains to eyebolts.
06.
Use a forklift/crane to lift unit .
07.
Move the unit to desired location of installation and slowly
place on the floor in a safe, pre-assigned area marked
appropriately.
Transportation Damage

Inspect the following areas of the unit for any signs of damage after
transportation:

Housing Assembly: dents, cracks, bends, leaks

Output Assembly: seal (leaks), dents, looseness, flatness (a level
should be fine in this application as a noticeable change in flatness due
to damage is the measurement being observed not the function
parameter).

Input Assembly: seal (leaks), dents
In the event of damage after transportation do not proceed
with installation until contacting the manufacturer.
Intermediate Storage

In the event of a need for storage for a delayed period of time (1 week +)
retain the unit within its original packaging.

The original packaging is conditioned to preserve the unit in most
environmental settings (save extreme ones).