DE-STA-CO MDE Series, Руководство по установке

Страница: 25 / 62

24
Markings and Weight

The following table illustrates the appropriate markings for transport placed
on the unit
’s packaging.

The unit
’s weight can be obtained from the Type-Plate.
Approved Transportation Equipment & Procedures

This section discusses necessary and recommended installation
equipment and procedures
Transportation Inside of Packaging

EQUIPMENT

Lifting straps/chains with safety hooks

Lifting frame

Forklift/Crane

Proper PPE: gloves, glasses, footwear

PREPARATION

Check to make sure only authorized personnel are present.

Set clear path of transportation that is clearly marked and
closed off.

Inspect package for any weak or damaged areas.

EXECUTION
INDEXER REDUCER
WEIGHT
(Kg)
MDE 600 SEWKHZ77 570
MDE 600 SEWKHZ67 570
MDE 600 NORDSK9042 655
MDE 600 NORDSK9032 605
MDE700 SEWKHZ87 770
MDE700 SEWKHZ77 730
MDE700 NORDSK9042 820
MDE700 NORDSK9032 770
MDE900 SEWKHZ97 1270
MDE900 SEWKHZ87 1130
MDE900 NORDSK9052 1270
MDE900 NORDSK9042 1180
Table 2 Approximate weights of MDE models with reducer
The weight provided is an average, not an exact value, of the unit.
Please reference the Type-Plate for accurate information in
applications involving the unit
’s weight.
Use a hoist or a crane to lift. Attach hooks to eye bolts (not
supplied by CAMCO) at two points at front and top of housing.
Use eyebolt on motor or strap around motor to level the MDE
during the lift.