Page 8/37
WOOD CHIPPER | User manual
May 2021
2.4
Safety decals
•
Make sure all safety decals are clean and legible.
•
Replace all damaged or missing decals.
•
Replaced parts with safety decals must display the relevant safety decals.
•
Item numbers can be found on the safety decals specified in chapter 3 on the right at the bottom. Use these
item numbers when you order replacement parts.
•
Safety decals can be obtained from your dealer or importer.
How to affix safety decals:
1.
Make sure the place where you want to affix them is clean and dry.
2.
Make sure the temperature is higher than 10 °C (50 °F).
3.
Determine the exact place before removing the paper on the rear side.
4.
Remove the smallest section of the paper on the rear side.
5.
Keep the decal at the required place and carefully press on the smallest sticky part.
6.
Remove the rest of the paper and careful smooth the rest of the decal until it is in the right place. Small air
bubbles can be pricked with a needle and smoothed using a bit of the backing paper.
2.4.1
Safety decal place
The safety symbol types and their locations on the machine are shown in the following figures. Good safety requires
that you become familiar with the various safety alerts and the warning type and area or a specific function related
to that area where you need to bear safety in mind.
