
De Gier B.V., Westlandseweg 9, 2291 PG WATERINGEN, THE NETHERLANDS, Tel. +31 (0)174 292089, Fax +31 (0)174 295644, E-mail: [email protected]
www.degier.eu
Version 1 – 2014 / 06 / 11
21
INSTALLATION MANUAL
10 Spare parts and parts replacement
Parts may only be replaced by qualified staff. Always use original spare parts and original lubricants. For
product safety reasons, De Gier only supplies complete motor gearboxes, limit switches and potentiometers as
replacement parts. Gear unit parts may only be replaced or repaired by an authorised service representative of De
Gier.
11 Disposal
Caution!
Improper disposal of waste oil is hazardous to the environment and to health. Used oil must be taken to a
collection point for waste oil. Avoid prolonged skin contact.
Drain used oil from the motor gearbox. Used oil must be collected, temporarily stored, transported and replaced
properly. Observe national legislation.
Collect waste oil and dispose of it in accordance with regulations. Clean up any spilled oil immediately using a
suitable emulsifier or absorbent material.
Dispose of housing parts, gear wheels, shafts and roller bearings of the transmission as scrap metal. This also
applies to parts made of grey cast iron if there is no provision for separate collection. The worm gears may
contain black non-ferrous metal alloys and must be disposed of accordingly. Dispose of the packaging materials in
accordance with regulations or bring them to a recycling station.
Materials and parts of the motor gearbox
Motor gearbox parts
Material
Gear wheels, shafts, bearings, retaining rings, ... Steel
Gear unit housing, housing parts
Cast iron
Worm gears
Bronze
Shaft seals, sealing caps
Elastomer (with steel)
Flat gaskets
Asbestos-free gasket material
Gear oil
Enriched mineral oil
12 Warranty
We only accept liability for original spare parts supplied by us. The warranty terms and conditions are the same as
the standard “Metaalunie” conditions. These conditions are listed on the back of the quotation and invoice forms.
An additional copy of terms and conditions can be sent to you free of charge on request. For products from the
Blue-line range a 3 year warranty period is applicable.
We reserve the right to make modifications.
Spare parts, Disposal and Warranty