ddm
hopt
+
schuler
Blatt.-Nr.:
Hybridkartenleser
18
862-A22S1U027B0-SPZ.idw
Hybrid Card Reader
7.0 Schnittstellen
Interface
Electrical Connections
One 6-pin connector, at the back of the device, is used to connect the device to a host computer
and to the power supply:
- The counteroart to the connector on the reader side is either
- Power supply: between 5 and 12 Volts DC
- Typical consumption: less than 50 mA
- The card latch circuit adds approx 250mA for a period of 40ms during latch close and latch open
operation.
- RS232 C Serial link
- ZH connector series, part number ZHR-8 or
- ZR connector series, part number 08ZR-8M
Both are from manufacturer JST (www.jst.com)
RXD
GND
TXD
Direction
Signal
DTR
1
VCC
6
Pin
5
4
3
2
CTS
In
Out
Out
In
In
In
Pin 1
