M O T I O N F E E D B A C K M A N A G E R
Figure 24. Options Screen – Reference Frequency and Amplitude Shown
7) Once the appropriate oscillator is selected the oscillator amplitude and
frequency can be programmed by inputting the values into the Reference
Circuit windows. The Amplitude and Frequency displays will update with
the closest system values available.
8) The Card Options section enables which type of display is shown in the
main screen. The binary display represents the digital angle, (Bit 1 =
180
°
, Bit 2 = 90
°
, Bit 3 = 45
°
etc…)The read delay defines the display
update rate.
9) Once the options are selected click on
OK.
The main screen will display
angular position.
Data Device Corporation
SB-3622X Manual
23
