H A R D W A R E I N S T A L L A T I O N
•
www.caldera.com
•
www.debian.org
•
www.slackware.com
•
www.suse.com
The following installation procedure is also described in the Install.txt and
Readme.txt files provided in the
SB3622X_X_Y_Z.TGZ
archive.
1. Create a new (working) directory called ‘
synchro
’ and go to it.
mkdir synchro
cd synchro
2. Go to super user ‘su’ (root) mode.
su
3. Copy the synchro archive to the working directory and
uncompress (TAR/G-ZIP) it.
tar –xzpPf SB3622X_X_Y_Z.TGZ
4. Create the shared library links and cache for runtime linking of
the synchro library.
/sbin/ldconfig
5. Change ownership of all of the files to normal user and then exit
superuser mode.
chown –R users.username *
exit
6. As superuser locate the PCI card information by viewing the pci
section of the proc kernel interface.
cat /proc/pci
The Vendor ID is ‘4ddc’, and the Device ID is ‘0600’ for the
SB-36220
card. Make a note of the data listed for the Logical Device #, Vendor
ID/Device ID, Bus #, and Device # (or Slot #).
7. Edit
/usr/lib/ddc/DDC_synchro.cfg
to set the correct data for the
Logical Device #, Vendor ID/Device ID, Bus #, and Device # (or
Slot #) previously noted in step 6. Exit superuser mode.
Logical Device # Bus Type
Device ID
Bus # Slot# Channel #
0
1
4ddc0600
0
10
0
Data Device Corporation
SB-3622X Manual
8
