DD Audio ZVL, Руководство пользователя

Страница: 8 / 24

PRE:
Passes the input signal from the source unit
through the ZVL’s subwoofer preamp (GAIN,
SUBSONIC, LFP) before sending it to the
outputs.
PASS:
Passes the input signal from the source unit
directly to the outputs with no effect from the ZVL’s
subwoofer preamp. This will be used for full range
signal distribution.
LINK:
Output pairs will be in phase with each other. This
will be the most common output setting for the
majority of applications including full range pass
through. See Linking Subwoofer Amplifiers
diagrams for proper Link mode wiring.
STRAP:
Converts the left and right channels of output
channels (1,2,3,4) from in phase to 180 degrees
out of phase from each other. This setting is only
used when configuring pairs of subwoofer
amplifiers in Strap mode. Channel pair 5 is
permanently set to Link mode. See the Strapping
Subwoofer Amplifiers diagrams for proper strap
mode wiring.
INPUT JUMPERS
OUTPUT JUMPERS
DD AUDIO / ZVL / 7