
33
CARE AND CLEANING
Plate glass cover
Retainer clip
Sockets for
the pins
Pins
Replacement bulb
Changing the oven light bulbs
The oven is illuminated by three 12 volt/20 watt halogen bulbs. These have a very long
life, but if you should need to replace one, use only a replacement bulb purchased from
your nearest DCS by Fisher & Paykel dealer and follow these steps:
1
Allow the oven to cool and then turn it off at the wall.
2
Take out the shelves and side racks (see ‘Removing and replacing the sliding shelves
and side racks’) and use a small flat-head screwdriver to twist and lift the retainer clip
at the top of the glass light cover while holding the glass to prevent it falling. The clip
pivots counter-clockwise (see the diagram).
3
Carefully lift the glass cover out of the lower support and pull out the faulty bulb.
4
Holding the replacement bulb in a soft cloth or tissue (touching the bulb will reduce its
life span), insert the new bulb.
5
Reposition the glass cover and twist the top clip back in place. The procedure is the
same for the light in the roof of the oven cavity.
Note: oven bulb replacement is not covered by your warranty.
Содержание WODV230
Страница 1: ...Wall oven WODV230 and WOSV230 models US CA USER GUIDE ...
Страница 2: ......
Страница 4: ......
Страница 51: ...47 ...