DCS LINA Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 50

DCS LINA Скачать руководство пользователя страница 49

FCC compliance statement

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.

You can determine whether this equipment is causing interference by turning it off. If the
interference stops, it was probably caused by the equipment or a peripheral device.

If your equipment does cause interference to radio or television reception, try to correct the
interference by one or more of the following measures:

•

Turn the television or radio antenna until the interference stops.

•

Move the equipment to one side or the other of the television or radio.

•

Move the equipment further way from the television or radio.

•

Plug the equipment into an outlet that is on a different circuit from the television or
radio. (That is, make certain the equipment and the television or radio are on circuits
controlled by different circuit breakers or fuses.)

(USA only) If necessary, consult dCS Americas LLC or an experienced radio / television
technician for additional suggestions.

Changes or modifications not expressly approved by dCS Americas LLC could void the
manufacturer’s warranty.

This product has demonstrated electromagnetic interference compliance under conditions
that included the use of compliant peripheral devices and shielded cables between system
components. In order to maintain compliance with FCC regulations, shielded cables
(including Ethernet network cables) must be used with this equipment. Operation with non-
approved equipment or unshielded cables is likely to result in interference to radio and TV
reception.

Responsible party (contact for FCC matters only)

dCS Americas LLC,
PNC Bank Bldg,
300 Delaware Ave, Suite 210,
Wilmington, DE 19801,
USA

EU Declaration of Conformity

This equipment has been tested and found to comply with the essential requirements of the
following Directives: 2014/30/EU, 2014/35/EU and 2015/863/EU.

This device is certified for indoor use only.

C

o

m

p

lia

n

c

e

LI

N

A

N

e

tw

o

rk

D

A

C

U

se

r

G

u

id

e

49

«
...
47
48
49
50
»

Содержание LINA



















































Отзывы:

Нет отзывов