DCS Delius Скачать руководство пользователя страница 66

Страница: 66 / 80

dCS Delius

User Manual

Manual for Software Issue 2.3x

dCS

Ltd

September 2004

Manual filename: Delius Manual v2.3x.doc

Page 66

email: [email protected]

English version

web-site: www.dcsltd.co.uk

The unit fails to respond to the controls

•

Check that the

STBY

indicator is not lit - if so press the

Power/Standby

button to return to normal operation. Alternatively, switch off, wait 10
seconds and switch on – Standby mode will be cancelled.

•

While locking to a source or changing some settings (e.g. Filter), the

microcontroller inside

Delius

is busy and will not respond to new commands

for a few seconds.

•

If the Mute fade-out rate is set to

Mute-Slw

, the unit may be unresponsive

for a few seconds while slow muting is in progress (see page

)

•

Short mains supply drop-outs may cause the microcontroller to lock up.

Switch off the unit, wait 10 seconds then switch on again. If this does not
clear the fault, please contact your dealer.

The Main Display turns on briefly when a control is operated, then turns off

•

This happens when the

Display Brightness

is set to

Bright 0

. Change to

any other brightness setting to stop the display blanking out (see page

The Left and Right channels are swapped

•

Check that the audio output cables are not reversed.

•

Open the menu and page through until the

Swap

page is displayed. If it is

set to

Swap-On

, change it to

Swap-Off.

•

Check that the channels are not swapped elsewhere in the system.

•

If you are using

Dual AES

mode, ensure that

AES 1

input is connected to

the output on the source equipment carrying the Left channel data (probably
labelled AES1 or AES A) and the

AES 2

input is connected to the output on

the source equipment carrying the Right channel data (probably labelled
AES2 or AES B). See the manual for the source equipment for information,
and also page

One audio output channel is low or absent

•

Check

that

the

Balance

control is correctly set (see

Rotary Control

page

•

Check that the audio output cables are connected correctly and are not

damaged.

•

Check that the balance is not offset elsewhere in the system.

The sound has a peculiar tonal balance

•

Set De-Emphasis to

Auto

– see page

•

If this fails to correct the problem, the De-Emphasis flags in the data stream

may be incorrectly set (this is rare but it does happen). To find the correct
De-Emphasis characteristic, change the De-Emphasis setting to

50/15

CCITT

Off

in turn until the correct setting is found. When you change to a

different disk or tape, we recommend setting

De-Emph

Auto

again.

Содержание Delius

















































































Результаты поиска

Содержание Delius

Отзывы:

DCS Delius, Руководство пользователя, Страница: 66 / 80

Результаты поиска

Содержание Delius

Отзывы: