6
COOKTOP USE
CAUTION:
For warranty coverage, DCS requires that burner adjustments be made by a
qualified technician at the time of installation. Extreme care should be used
when adjustments are made after installation. Improper or lack of
adjustments will void your warranty.
CONTROL KNOBS:
The control knobs and knob bezels are readily associated with the burners they control and are
located on the right hand side of the Cooktop. The sealed top burners have an infinite number of heat
settings and there are no fixed positions on the control knobs between HI and SIM (with the exception
of LOW.) To light the burner push control knob in and rotate counterclockwise. An audible clicking
sound will be heard and the burner should light immediately. To use, turn the knob to the desired
setting.
COOKING UTENSILS:
For best results we recommend using Professional Cookware. These
can be found at your finer department stores, specialty cooking shops,
or restaurant supply stores. If using regular cookware be very careful if
the pans have plastic handles, as these large professional size burners
can flame up on the outside of the pan and melt or bubble the
handles.
TOP VIEW OF KNOB BEZEL
THESE GRAPHICS
SHOW BURNER
LOCATION:
LEFT REAR BURNER
“ON”
INDICATOR
LIGHT
BURNERS:
Your new Drop-In Cooktop is equipped with
burners typical of those used in restaurants. These
restaurant style burners are comprised of high
strength die cast aluminum burner bases and
simmer port rings, precision forged brass port
rings, and cast iron burner caps.
Your cooktop is equipped with 4 burners rated at
11,000 Btu/hr, and one HI-output burner rated at
17,500 Btu/hr. Your new Drop-In Cooktop has
exceptionally low simmer capabilities. (See chart
on page 7.) The burner system is designed for
maximum cleanability and control. All the cooktop
burners have electronic spark re-ignition to
eliminate continuously burning pilots, if the flame
is blown out, it will relight.
Cap
Brass
Port
Ring
Simmer
Ring
Hex Nut
Base
Brass Port
Ring
Locating
Pin
Locating
Pin
Locating
Notch
Locating
Pin Hole
Inside
