Cooktop Use
6
CAUTION:
For warranty coverage, DCS requires that burner adjustments be made by a qualified
technician at the time of installation. Extreme care should be used when adjustments are
made after installation. Improper or lack of adjustments will void your warranty.
CONTROL KNOBS:
The control knobs and knob bezels are readily associated with the burners they control and are located
on the right hand side of the Cooktop.The sealed top burners have an infinite number of heat settings
and there are no fixed positions on the control knobs between HI and SIM (with the exception of
LOW.) To light the burner push control knob in and rotate counterclockwise. An audible clicking sound
will be heard and the burner should light immediately.To use, turn the knob to the desired setting.
COOKING UTENSILS:
For best results we recommend using Professional Cookware.
These can be found at your finer department stores, specialty
cooking shops, or restaurant supply stores. If using regular
cookware be very careful if the pans have plastic handles, as
these large professional size burners can flame up on the outside
of the pan and melt or bubble the handles.
TOP VIEW OF KNOB BEZEL
THESE GRAPHICS
SHOW BURNER
LOCATION:
LEFT REAR BURNER
“ON”
INDICATOR
LIGHT
BURNERS:
Your new Drop-In Cooktop is equipped with burners
typical of those used in restaurants.These restaurant
style burners are comprised of high strength die cast
aluminum burner bases and simmer port rings, precision
forged brass port rings, and cast iron burner caps.
Your cooktop is equipped with 4 burners rated at
11,000 Btu/hr, and one HI-output burner rated at
17,500 Btu/hr.Your new Drop-In Cooktop has
exceptionally low simmer capabilities. (See chart on
page 7.) The burner system is designed for maximum
cleanability and control. All the cooktop burners have
electronic spark re-ignition to eliminate continuously
burning pilots, if the flame is blown out, it will relight.
Cap
Brass
Port Ring
Simmer
Ring
Hex Nut
Base
Brass Port
Ring
Locating Pin
Locating Pin
Locating
Notch
Locating
Pin Hole
Inside
