manualshive.com logo in svg

DCS ActiveSmart RS36A80JC, Руководство по установке, Страница: 27 / 38

Поделиться
Скачать
DCS ActiveSmart RS36A80JC Скачать руководство пользователя страница 27

25

!4

   ASSEMBLE DOOR PANEL SET

The assembly of DCS by Fisher & Paykel kits (Stainless steel door panels) and custom door panels are outlined below. For DCS by Fisher & Paykel kits, only remove the protective film for handle 
installation. This will protect the finish of the door panels until installation is complete.

1 

Mounting handle 

(refer to 

A

)

For DCS by Fisher & Paykel door panel 
sets, remove the plastic plugs from the 
handle holes x4. Align the handle to the 
holes and secure with screw handle x4 
(M5 x 25 pan head socket screws).

For custom panels, ensure handle is 
secured 2 9/16” (65 mm) from the inner edge 
of the panel to the center – this will avoid 
interference with bracket installation.

2 

Hanging bracket 

(refer to 

B

)

For DCS by Fisher & Paykel door panel sets, 
align the bracket to the holes and secure 
with screws x4 (M5 x 14 Mush Phillips SS).

For custom panels, secure bracket with 
screws x4 (#8 x 16 Mush washer screws).

3 

Side brackets and straps 

(refer to 

C

)

For DCS by Fisher & Paykel 
door panel sets, align 
bracket and strap to the 
holes on the side of the 
panel and secure with 
screws x2 (M5 x 14 
Mush Phillips SS).

For custom panels, 
secure bracket with 
screws x2 (#8 x 16 
Mush washer screws).

Repeat this process for 

all brackets and straps, and 

remaining French door panel.

A

French door panels

Drawer door panel

4 

Mounting handle 

(refer to 

D

)

For DCS by Fisher & Paykel door panel 
sets, remove the plastic plugs from the 
handle holes x4. Align the handle to the 
holes and secure with screw handle x4 
(M5 x 25 pan head socket screws).

For custom panels, ensure handle screw 
heads are counter sunk into the back 
of the panel to avoid interference with 
hanging bracket.

5 

Hanging bracket 

(refer to 

E

)

For DCS by Fisher & Paykel door panel 
sets, align the bracket to the holes and 
secure with screws x6 (M5 x 14 Mush 
Phillips SS).

For custom panels, secure bracket with 
screws x6 (#8 x 16 Mush washer screws).

6 

Side brackets and straps 

(refer to 

F

)

For DCS by Fisher & Paykel door 
panel sets, align bracket and strap to 
the holes on the side of the panel and 
secure with screws x2 (M5 x 14 Mush 
Phillips SS).

For custom panels, secure bracket 
with screws x2 (#8 x 16 Mush washer 
screws).

Repeat this process for all brackets 

and straps.

B

C

F

E

D

Содержание ActiveSmart RS36A80JC







































Отзывы:

Нет отзывов