manualshive.com logo in svg

DCS ActiveSmart RS36A80JC, Руководство по установке, Страница: 17 / 38

Поделиться
Скачать
DCS ActiveSmart RS36A80JC Скачать руководство пользователя страница 17

15

7

   CUSTOM DOOR PANEL DIMENSIONS

The drawings below apply to non-Water dispensing models only (RS36A80JC DCS). Dimensions are shown in Imperial (inches) and apply for the preparation and installation of custom door panels.
For Dwg and Dxf files of the below panel preparation download the folder on http://www.dcsappliances.com/designers-architects/

All measurements to be made 
from inner bottom corner. 
For the second panel mirror 
and repeat dimensions using 
inner bottom corner as the 
reference point.

Ensure handle is mounted 
2 9/16” from inner edge of panel 
to the center – this will avoid 
interference with brackets.

1 3/8

16 5/16

2 5/32

4 31/32

6 15/16

24 15/16

26 29/32

38 ⅝

40

Ø  3/32 REF

12x Pilot holes recommended for bracket attachment.
(Do not penetrate front surface).

15 7/16

TOP PANEL – REAR VIEW

Ø 3/32 REF

10x Pilot holes recommended for 
bracket attachment.  
(Do not penetrate front surface).

15 5/32

5 1/32

1 5/32

3 7/16

19 3/8

21 11/32

16 3/8

All measurements to be made 

from top and centerline.

BOTTOM PANEL – REAR VIEW

Ensure handle screw heads are counter sunk into back 
of panel to avoid interfering with hanging bracket.

Содержание ActiveSmart RS36A80JC







































Отзывы:

Нет отзывов