Introduction
DCP-WR300N
3
by WPS function.
Blinking
WPS handshaking is in progress.
Off
The WPS function is disabled.
LAN(1~4)
On
There is a device connected to this LAN port.
Blinking
Data is being transmitted over the corresponding LAN
port.
Off
No device is connected to this LAN port.
USB
On
3G modem is connected but no data being transmitted
Blinking
Data is being transmitted over 3G modem
Off
No device is connected to the USB port.
Rear Panel
The following table describes the interfaces and buttons of the device:
Interface
Description
Reset
Reset to the factory default configuration. Keep the device
powered on, and insert a needle into the hole for 3 seconds,
then release it. The device is reset to the factory default
configuration.
ON/OFF
Power switch, power on or power off the device.
Power ON/OFF
LAN 1
LAN 2
LAN 3
LAN 4
DSL
Reset
WPS/WIFI
Содержание DCP-WR300N
