DCN EAP280-L, Быстрое руководство по установке

Страница: 2 / 11

Wall Mounting
2 3
Please follow the length and width in picture 1, and then use marker pen to mark the drilling
location.
is covert security installation is insecurity installation (The figure draw line
downward).
Please use 6mm drill head, drill holes with a depth of 35-40mm according to the marked place.
Plug in the holes with nut and use a hammer to knock the nut.
Put the mounting kit’s hole accurate to nut and use three screw to install mounting kit to the wall.
Put the mounting holes behind of the AP onto the
mounting kit’s pegs and then pull the AP
down until copper direction to complete installation.
2
1
3
5
4
Preparing for Installation
2
Equipment Installation

Before installation, installation personnel must take the necessary safety
measures to ensure personal safety

Do not put AP and Tool on walkways to avoid damage

Device support wall mounting and ceiling mounting
，
make sure the ceiling and walls
can bear safety before installation

Installation may need tools listed on the below picture.(Tools need to self prepared)
A
B 5
4
b
a
Ladder Marker Pen Hand Driller Phillips
screwdriver
Claw
Hammer
Please plug in cable before the installation to the wall else after installation, cable cannot be plugged in.
Attention