DCL22 Page3
Tips and Safety Precautions
THIS PRODUCT HAS BEEN TESTED FOR COMPLIANCE WITH
REGULATORY SAFETY CERTIFICATIONS
This product is designed and manufactured to operate within defined design
limits, and misuse may result in electric shock or fire. To prevent the product
from being damaged, the following rules should be observed for the
installation, use and maintenance of the product. Read the following safety
instructions before operating the display. Keep these instructions in a safe
place for future reference.
•
To avoid the risk of electric shock or component damage, switch off the
power before connecting other components to the DCL22 LCD
MONITOR.
•
Unplug the power cord before cleaning the DCL22 LCD MONITOR. Do
not use a liquid or a spray cleaner for cleaning the product. Do not use
abrasive cleaners.
•
Always use the accessories recommended by the manufacturer to insure
compatibility.
•
When moving the DCL22 LCD MONITOR from an area of low
temperature to an area of high temperature, condensation may form on
the housing. Do not turn on the DCL22 LCD MONITOR immediately after
this to avoid causing fire, electric shock or component damage.
•
Do not place the DCL22 LCD MONITOR on an unstable cart, stand, or
table. If the DCL22 LCD MONITOR falls, it can injure a person and cause
serious damage to the appliance. Use only a cart or stand recommended
by the manufacturer or sold with the DCL22 LCD MONITOR.
•
Any heat source should maintain a distance of at least 5 feet away from
the DCL22 LCD MONITOR, i.e. radiator, heater, oven, amplifier etc. Do
not install the product too close to anything that produces smoke or
moisture. Operating the product close to smoke or moisture may cause
fire or electric shock.
•
Slots and openings in the back and bottom of the bezel are provided for
ventilation. To ensure reliable operation of the DCL22 LCD MONITOR
and to protect it from overheating, be sure these openings are not
blocked or covered. Do not place the DCL22 LCD MONITOR in a
bookcase or cabinet unless proper ventilation is provided.
•
It is not recommended to use the DCL22 LCD MONITOR in a portrait
format (by rotating 90 degrees) under high temperature environment
(25°C or higher), since this would retard heat dissipation and would
eventually damage the monitor.
•
Never push any object into the ventilation slots of the DCL22 LCD
MONITOR. Do not place any objects on the top of the Product. It could
short circuit parts causing a fire or electric shock. Never spill liquids on
the DCL22 LCD MONITOR.
•
The DCL22 LCD MONITOR should be operated only from the type of
power source indicated on the label. If you are not sure of the type of
power supplied to your home, consult your dealer or local power
company.
•
The power cable must be replaced when using different voltage from that
specified in the User Manual. For more information, contact your dealer.