D
IGITAL
C
ONTROL
I
NCORPORATED
ii
Supplement B for DigiTrak® Falcon F5®
403-1840-00-A, printed on 10/4/2017
© 2017 by Digital Control Incorporated. All rights reserved.
Trademarks
The DCI
®
logo, DigiTrak
®
, DigiTrak Falcon
®
, and Falcon F5
®
, are U.S. registered trademarks.
Patents
Patent pending.
Limited Warranty
All products manufactured and sold by Digital Control Incorporated (DCI) are subject to the terms of a Limited Warranty. A copy of the
Limited Warranty can also be obtained at
.
Important Notice
All statements, technical information, and recommendations related to DCI products are based on information believed to be reliable.
However, DCI does not warrant or guarantee the accuracy or completeness of such information. Before using any DCI product, the
user should determine the suitability of the product for its intended use. All statements herein refer to DCI products as delivered by DCI
for use with horizontal directional drilling in the ordinary course, and do not apply to any user customizations, third-party products, or
any usage of the DCI product outside of the ordinary course. Nothing herein shall constitute a warranty by DCI nor will anything herein
be deemed to modify the terms of DCI’s existing Limited Warranty applicable to all DCI products. DCI may update or correct the
information in this manual from time to time. You may find the most recent version of this manual on DCI's website,
Under
Service & Support
, click
Documentation
and select from the
Manuals
drop-down menu.
Watch our DigiTrak Training Videos at
