D
IGITAL
C
ONTROL
I
NCORPORATED
Supplement B for DigiTrak® Falcon F5®
9
Updates to Manual
Beyond the features already discussed in this document, this section addresses numerous updates and
improvements to the current Falcon F5 Operator's Manual, including helpful tips on using certain features.
They are marked as New, Helpful, Clarification, or Deleted. Please read these topics to learn the latest
information about your locating system.
Getting Started
New:
Falcon technology is now better at combating passive interference using Sub-k™ Rebar transmitters.
This transmitter allocates three new ultra-low bands between 0.33 and 0.75 kHz (330–750 Hz) specifically
for depth/locate readings, plus Bands 7, 11, and 16 for data. Together these are an excellent combination for
tough rebar conditions. The Sub-k Rebar transmitter is available in 19", 15", and 8" sizes.
New:
Falcon F5 now also offers GPS capability when you add the convenient iGPS
®
module, available
separately or bundled with your new Falcon F5. Combine with the free LWD Mobile app to see your bore
plotted in real time on a map on your smart device and add a map view to the Log-While-Drilling (LWD) report
on your PC. Read the Falcon F5 Supplement A, available on our
, for more information on iGPS.
Setup Summary
New:
The frequency optimizer now shows interference in the currently selected bands at the left side of the
optimization
(see page 5). Before optimizing, use these readings to find the place along the intended
bore path with the highest level of interference, then optimize there. If the existing bands are performing as
well as the newly optimized bands, you can continue using them without having to pair and calibrate.
New:
When pairing, the receiver now offers an option for Full Scale Sensitive Pitch (FSSP), discussed
earlier in this Supplement. FSSP is available on all FTR and FT5p transmitters with software v2.1.1.0 or
higher.
Receiver
Overview
Clarification:
The IR port on the receiver is the small round port on the upper center of the receiver's front
panel.
1.
IR port
Falcon Receiver
New:
To view which transmitters are compatible with your receiver, open the Main menu, toggle down and
select
System Information
, and toggle down again to view a list. Your receiver may need an update to use
our latest transmitters; please contact Customer Service for more information.
This screen also provides software and serial number information for a connected iGPS module.
