6
INSTALLATION
6
ORTHODONTIC CHAIR
Installation Instructions
FLOOR DRILLING
Location: Full size templates are available upon request for laying out location of chair and utilities (if required)
prior to actual installation.
CAUTION: Base must be anchored to floor. Failure to do so may result in serious bodily injury
to operator and/or patient and could cause unwarranted product damage. Chairs not properly
anchored do not meet warranty requirements.
CAUTION: To prevent possible injury or damage, do not drill through carpeting. Cut away carpeting
at anchor hole locations.
258 mm
240 mm
FRONT
CAUTION: Before drilling into the floor, be sure to locate all utilities that may already be routed in
the floor to ensure that you can safely drill.
For concrete floors, drill 1/2" holes to approximately 2 1/2" deep on the floor according to the below
dimensions.
For wood floors, pre-drill holes sized for 1/2" lag bolts 2 1/2" deep.
