Instruction manual HM2928 N IMMERSION BLENDER KIT
dcg16.it
9
CAUTION: Chopping time does not exceed more than 30 seconds
each time, and food quantity is under 300 g.
HOW TO CLEANING
1. Unplug the appliance.
2. Clean the body of the appliance with a damp cloth. Do not immerse
the motor unit in any liquid.
3. The chopper gear box may be rinsed under the tap, but do not
immerse it in water.
4. Clean the blades and accessories immediately after using, and
avoid bacterial growth. Take care of the blades because they are
too sharp
HOW TO STORAGE
For easily storage the appliance, locate the accessories holder on the
chopper gear box. Turn the motor unit on the holder, then put the
whisk, blender stick on the accessories holder separately.
CAUTION: Use extreme care when handing the Double
Blade Knife.
Do not touch the Blades with your fingers. The Blades
are very sharp and can cause injury if touched.
1. Carefully unpack the Stick Blender and all accessories.
2. Wash the Mixing Blender and Lid, Chopper Container
and Lid, Double Blade Knife, Stainless Steel Beaters,
and Balloon Whisk in warm soapy water. Rinse and dry
thoroughly.
3. Never immerse the Blender Body, Stick Blender or Single and
Double Gearboxes in water or any other liquid. If necessary, these
attachments can be wiped clean with a moistened cloth. The Stick
Blender can be washed under running water; but be careful not to
allow water to enter the hollow shaft.
4. Always dry the Stick Blender thoroughly so that no water can enter
the Blender Body.
