Instruction manual DR2815N BEL VAPOR
dcg16.it
19
as shown in Figure 2, and align the arrow on the spray cup with
the single-line mark on the machine body. Then the spray cup with
hairbrush can be pulled out.
(I). (II)
2. Install spray cup with round brush or bent spray cup
For direct installation on short spray nozzle, aim the spray cup
with round brush or bent spray cup at the top of spray nozzle, as
shown in Figure 3, and push the spray cup upwards until it is in
position. As the short spray nozzle and spray cup are positioned in
six directions, the angle and direction can be adjusted during the
installation. Or, first install long spray cup and then the spray cup
with round brush or bent spray cup. The long spray cup is installed
in the same method as the installation of spray cup with hairbrush.
The spray cup with round brush or bent spray cup and long spray
cup can be installed in the same procedures as the installation on
short spray nozzle.
(III)
