DCCconcepts Cobalt Alpha Series Скачать руководство пользователя

Страница: 23 / 25

page 26

Cobalt

Alpha and Cobalt

Box

(Accessories)

Cobalt

box interfaces with EVERY DCC BRAND using only the track outputs of your DCC system.

System connection may require accessories such as connection panels, leads and additional cables.
While the various DCC brands may supply some of them, DCCconcepts also offer a range of unique

items properly designed for Cobalt Alpha products. Additionally, some items that are useful for other

brands are unique, such as the convenient 6-wire curly cord for the NCE PowerCab and the very useful,

versatile 3-connection Alpha-Panel which is equally usable for NCE PowerCab or Power Pro systems.

Please note:

Check the system diagrams carefully before connection. Do NOT attempt connection without adapters,

even if your system seems to have the same sort of connector, as incorrect connection will almost cer-

tainly cause easily identifyable related damage that will

NOT

be covered by warranty!

(Please note: The images used on this page are representative only and the items that you receive may look a little different)

6 foot (1.7m) 6-wire Curly Cord, DCD-ACL

While each Cobalt

box and

Cobalt

Central is

supplie dwith one, there is always a need for more... and

NCE PowerCab users will be delighted to replace their

ÁDWFRUGZLWKWKLVFDEOHDVLWLV)$5PRUHFRQYHQLHQW

Please: Use ONLY this cord or its equivalent to connect

between multiple

Cobalt

box units!

Universal RJ 12 Layout Panel, DCD-DAP

Cobalt

box and

Cobalt

Central users

ZLOOÀQGWKLVSDQHOKHOSIXODVLWJLYHVDOORI

the connection they will need.
We made this panel really versatile so this

one panel type suits both NCE PowerCab

and NCE Power Pro users thanks to a single

switch on the rear PCB! We also added three

RJ12 connection points where most only

give two to increase connection potential.
Set the onboard switch to the PowerCab position and the Left hand socket becomes the “PowerCab

Port.... With it’s LED

JORZLQJ%/8(ZKHQWKH3RZHU&DEÀQLVKHVLWV´%RRWµVHTXHQFH

Set it to the Universal position and that same socket becomes a standard RJ12 socket for

connection of a Procab, a PowerCab in “Procab mode” or any other NCE handset and the LED

will now glow GREEN when the bus is operational - as will the other two sockets on the panel.

2IFRXUVH$VWKHSDQHOLVÀWWHGZLWK5-VRFNHWVZLWKDOOZLUHGWKH\DUHDOVRXVDEOHZLWK

ROCO and some others DCC systems!

PLEASE NOTE:

In some cases, the images used in this manual are of prototype or pre-production units and may vary slightly in appearance

from those actually on sale. However in all cases all of the connections and diagrams are identical and the information given is correct.

Содержание Cobalt Alpha Series


























Результаты поиска

Содержание Cobalt Alpha Series

Отзывы:

Похожие инструкции для Cobalt Alpha Series

Бренды по названию

Популярные бренды

DCCconcepts Cobalt Alpha Series, Руководство пользователя

Результаты поиска

Содержание Cobalt Alpha Series

Отзывы:

Похожие инструкции для Cobalt Alpha Series

Бренды по названию

Популярные бренды