Chapter 2
Installation and Configuration
Overview
The PAS is connected between two audio sources and a single audio receiving device. There are two
instances of this operation, and they may be cascaded to allow for three inputs to a single transmitter, or
used independently with two inputs to each of two transmitters. It is usually installed at a transmitter site to
allow automatic operation by multiple control operators of the transmitter.
All connections to the PAS use RJ-45 connectors or the power connector screw terminals.
Audio Source Connections:
Switched Transmit Audio Flow
Received audio from the transmitter is always passed to pins 3 & 6 of both priority and secondary devices.
5
