1) Insert power plug into the power socket.
(
Fig. 9
)
2) Turn on the water supply, release the
trigger lock, active the handle trigger of
sprayer, and let the water out until no air
inside the pipe. (
Fig. 10
)
3) Turn on the machine and press the
switch to ON position. (
Fig. 11
)
4) Activate the trigger of pikestaff, when releasing handle trigger, the machine stops
automatically, when activate the trigger of pikestaff again, the machine starts again. It
is not allowed to quick make-and-break switch, and it should be stopped for several
seconds before restarting.
Stop the Pressure Washer
1) Cut off water supply, activate the trigger of
pikestaff, and keep the machine running until
water no longer flows from the nozzle. 2) Stop
the machine and press the switch to OFF
position.
2) Pull out machine plug from power socket, roll
up power cord and wind it to the wire rack.(
Fig.
12
)
3) Remove the quick connector from water inlet
nut, and dismantle the water inlet pipe.(
Fig. 13
)
4) Press the gun valve bush button to
dismantle the high pressure pipe. (
Fig. 14
)
5) Contrarotate high pressure pipe at water
outlet to dismantle the high pressure pipe
6) Put the pikestaff, gun barrel and other
accessories into bracket of pressure washer.
(
Fig. 15
)
-9- -10-
