background image

GENERAL POWER TOOL SAFETY WARNINGS 

Please read and comply with these original instructions prior to the initial operation.

 

 

Danger! 

The  high  pressure  produced  by  the  appliance  is  very  hazardous  if 

connected with power source.

 

 

Warning! 

This  appliance  must  not  be  operated  by  children  or  untrained 

personnel.

 

 

Before

 

starting  the  appliance,  carefully  check  whether  there  is  some  possible 

failure. The cable insulation layer must be intact. 

  The  operator  and  people  near  the  appliance  must  take  protection  to  avoid  the 

splash during the operation. 

  Pull  out  the  power  plug  when  clean,  maintain  the  appliance  or  replace  the  spare 

parts. 

 Follow all safety rules during the operation. 

a) Accessories and Spare Parts 

  CAUTION:

  To  ensure  appliance  safety,  use  only  original  spare  parts  from  the 

manufacturer or approved by the manufacturer. 

  High  pressure  pipes,  fittings  and  couplings  are  important  for  the  safety  of  the 

appliance. 

b) Physical, Sensory or Mental Capacities 

This  appliance  is  not  intended  for  use  by  persons(including  children)  with  reduced 

physical, sensory or mental capacities.

 

C) Application 

 

Use this high-pressure washer for private households only and the intended use of 

this  product  covers  the  cleaning  of  vehicles,  buildings,  terraces,  garden  equipment 

and hay mowers. 

 

All  other uses  are  improper,  and  our  company  will  take  no  responsibilities  for  the 

damage caused by those improper uses. 

 Proper use also includes correct operation, maintenance, and repair. 

d) Clothing and Equipment 

 Be careful to protect your body during the operation. 

  Wear  antiskid  shoes.  Wear  goggles,  earmuffs  and  protective  clothing  during  the 

operation. 

e) Cleaning Agent 

The  appliance  has  been  designed  for  use  with  the  cleaning  agent  supplied  or 

recommended by the manufacturer.

   

f) Checking the Appliance Before Operation 

 Do not use the machine if a supply cord or important parts of the machine are damaged, 

e.g. safety devices, high pressure pipes, trigger gun. 

 Always check to see that the trigger on the spray handle actuates easily and returns to 

the original position when released. 

 Always keep the high-pressure pipe and gun barrel accessories in good condition, and 

are mounted properly. 

g) Electrical Connection 

 

Warning! 

The voltage and frequency of the appliance must accord with those of the 

power source.

 

 The appliance may only be connected to an electric supply by a professional electrician. 

  For  safety  reasons,  we  recommend  that  you  operate  the  appliance  only  via  a  residual 

current device (max. 30mA or 30ms). 

 The extension cable must be watertight and must never lie in water. The specification of 

the extension cable must apply to the power of this appliance. 

h) Water Connection 

 According to applicable regulations , the appliance must never be used on the drinking 

water net without a backflow preventer. 

Caution: 

use  only  water  without  any  impurities.  Install  an  external  strainer  if  there  is 

quicksand in inlet water.

 

i) Working Period 

 

Warning! 

 

 The appliance may not be operate in explosive atmospheres. 

 Do not clean asbestos-containing surface under high-pressure mode.   

  Never  draw in  fluids  containing  solvents  or  undiluted  acids  and  solvents!  This  includes 

petrol, paint thinner and heating oil. 

 Do not direct the jet against yourself or others in order to clean clothes or foot-wear. 

 The jet must not be directed at persons, live electrical equipment or the machine itself. 

                                                     

-1-                                                                                                                                                            -2-

 

Содержание AQW5.5/10










Отзывы: