dbx Zone Pro 640 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 59

background image

®

Application Guide

SECTION 5

ZonePro

™

37

ZonePro™ User Manual

Notes - Restaurant/Bar Application

1. The ZonePro 640 is located in the manager’s office and provides source selection for the wait-

ing area.

2. Both the restaurant and the bar area have ZC controllers. The bar is using them for source

selection and volume control, the ZC-1 in the restaurant is used for volume control, and the
ZC-3 is used for scene changes.

3. Paging is done from the hostess station and is pre-assigned to the bar, and the waiting area.
4. The Zone Controllers for the bar and restaurant are wired with CAT5 cable in series with

the bar ZC-3 and ZC-1 as ID #2, and #3, and the restaurant ZC-3 and ZC-1 as ID #1 and #4.

5. Scenes have been created that accommodate changes in the venue such as a volume boost

in the bar for happy hour as well as the regular volume boost in the restaurant for the
lunch time rush and the dinner crowd.

6. The ZC-3 in the restaurant is used to change between scenes as needed.
7. The Schedule function has been used to load the Rest. Boost scene automatically at the begin-

ning of the lunch and dinner periods.

8. EQ, Feedback Suppression and Compression are used on the hostess mic to help improve

intelligibility and reduce unwanted feedback in the system.

9. Limiting is used in the bar area to provide system protection.
10. AutoWarmth® is engaged in the bar to maintain the bandwidth even when the level drops,

while Auto Gain Control is being used in the restaurant and waiting areas to maintain the sig-
nal level.

11. EQ is used in all zones to make the system sound as good as possible.

«
...
43
44
45
46
47
...
»

Содержание Zone Pro 640




























































Отзывы:

Нет отзывов

Похожие инструкции для Zone Pro 640

MegaRAID SATA 300-4XLP

Бренд: LSI Страницы: 3

Бренд: LevelOne Страницы: 31

PCI-6110E/6111E

Бренд: National Instruments Страницы: 113

Бренд: IDT Страницы: 207

Бренд: Nakayo Страницы: 119

Бренд: uneron Страницы: 13

Бренд: Uctronics Страницы: 12

Бренд: Allen-Bradley Страницы: 76

ROADRECORDER 8400 NVR

Бренд: Safety Vision Страницы: 27

System 4 Landmark Technic Processor

Бренд: Ametek Land Страницы: 34

Бренд: Kodak Страницы: 86

Бренд: New Media Technology Страницы: 26

Бренд: COMMUNICATIONS-APPLIED TECHNOLOGY Страницы: 36

Бренд: StarTech.com Страницы: 8

CARDBUS CB420USB

Бренд: StarTech.com Страницы: 9

Бренд: Measurement Computing Страницы: 24

Бренд: Measurement Computing Страницы: 23

Бренд: Measurement Computing Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды