8
-- The LCD displays standby status.(LCD version)
-- The power indicator lights and the power is on.(LED Indicator version)
NOTE:
For the first time usage, turn on both units, they can automatically scan the
corresponding code at once without press any key. If reset the corresponding code for
both units, user has to press the
LINK
key.
B. Baby unit emission:
1. Place Baby unit in room where you intend to use it.
2. Push the SENSITIVITY switch to a desired position to turn on the Baby unit
transmission.
3. As soon as the Baby unit transmits a signal, then:
LCD version
LED Indicator version
LCD backlight is
activated.
Constantly changing display-readouts
4. The transmitter is standby status when no signal is transmitted.
LCD version
LED Indicator version
LCD backlight turned off.
C. Parents unit reception:
1. Place Parents unit in room where you intend to use it.
2. Slide the VOLUME switch to a desired position and the unit is ready for reception.
3. If the unit receives a signal,
LCD version
LED Indicator version
constantly changing display-readouts
4. The receiver is standby status when no signal is received.
LCD version
LED Indicator version
LCD backlight turned off.
When you experience interference (buzzing or static, etc.), reset both units to another
corresponding code. ( details please refer to P.11 – scan the corresponding code for the
units )
Green light
Red light
Red light
Green light
Red light
