background image

                 

 

得伯乐科技有限公司

                             

DBL Technology Limited                                                                                                         

RoIP-302 User Manual 

                                                                                                                                                                                                                       

Web: 

www.dbltek.com

 

Tel: +86 755 8829 0211 

 

III. Overview 

The fundamental of RoIP

Radio over IP

technology is to convert the audio and PTT signals in 

a radio terminal into IP packets and then transmit the data via the IP networks. The challenge in this 

technology is to insure that the audio is transmitted in real time and the PPT control signal is 

transmitted 

immediately  and reliably. The radio  range is  general  limited by the restricted transmitting power, 
the antenna sensitivity, and other environmental factors. The success deployment of this technology 
extends  the  coverage  of  a  radio  network  without  using  expensive  repeaters  or  links  up  multiple 
radio  networks  in  the  world.  In  addition,  this  technology  can  also  link  up  the  radio  world  to  the 
VoIP  world  and  the  cellular  world  easily.  It  truly  makes  voice  communications  across  multiple 
networks possible. 

RoIP302 series is  developed based on VoIP technology to  realize RoIP  functions in  order to 

create  a  new  type  of  gateway  to  bridge  voice  communications  across  multiple  networks  (Radio, 
Cellular, VoIP). Its main advantages are low bandwidth usage, high fault tolerant, low loss in voice 
quality, fast response, easy installation and configuration. It is ideal for setting up a private network 
with  multiple  voice  communication  platforms,  a  distributed  network  for  remote  management,  a 
network with extended coverage, and an integrated network of multiple amateur radio networks.   

RoIP302  Series  Cross-Network  Gateway  has  3  PTT  interfaces.  Up  to  3  audio  channels  from 

radio  networks  can  be  connected  to  the  RoIP302  simultaneously.  All  3  channels  can  be 
programmed into the same or different groups in order to bridge real time voice communications to 
various network interfaces. 

RoIP302 Series has a built-in GSM / CDMA cellular phone module, user can access the radio 

networks  connected  via  the  cellular  network  installed.  A  radio  terminal  equipped  with  DTMF 
generation capability can make an outgoing call via the cellular network as well. This links up the 
two networks which cannot be linked up via any traditional means. 

RoIP302 Series  gateway can also  be  a remote ON/OFF Switch. User can control the built-in 

relay to switch on or off the devices that are under control. These devices could be an alarm signal,a 
light, a public announce system, an electronic lock, etc. 

RoIP302 Series gateway supports routing of IP voice stream to via a recording server. Voice 

records can then be saved to a hard disk and can be retrieved at any time for examinations. 

RoIP302 Series gateway can be installed in IP networks with intranet or internet connections 

via ADSL modem, Cable modem, or Local Area Network (LAN). The unique built-in DDNS client 
can  help  to  simplify  the  installation  and  configuration  without  relying  on  a  voice  relay  server  in 
order to achieve interconnections among RoIP302 Series gateways. 

 
 

Содержание ROIP302 Series

































Отзывы: