background image

13

6.0 SPECIFICATIONS

•  Working Load:

 Maximum of two persons with a combined weight of 310 lbs. (141 

kg) per person. 

•  Materials and Construction:

 

General Construction: 

Welded Steel/Aluminum

 

Finish (Aluminum):     

Yellow Powder Coat

 

Hardware Material:     

Zinc Plated   

7.0 TERMINOLOGY

Authorized Person

: A person assigned by the employer to perform duties at a 

location where the person will be exposed to a fall hazard (otherwise referred to as 

“user” for the purpose of these instructions).

Rescuer

: Person or persons other than the rescue subject acting to perform an 

assisted rescue by operation of a rescue system.

Certified Anchorage

: An anchorage for fall arrest, positioning, restraint, or rescue 

systems that a qualified person certifies to be capable of supporting the potential fall 

forces that could be encountered during a fall or that meet the criteria for a certified 

anchorage prescribed in this standard.

Qualified Person

: A person with a recognized degree or professional certificate and 

with extensive knowledge, training, and experience in the fall protection and rescue 

field who is capable of designing, analyzing, evaluating and specifying fall protection 

and rescue systems to the extent required by this standard.

Competent Person

: One who is capable of identifying existing and predictable 

hazards in the surroundings or working conditions which are unsanitary, hazardous, 

or dangerous to employees, and who has authorization to take prompt corrective 

measures to eliminate them.

Содержание FlexiGuard 8517716

















Отзывы: