16
receptor of quick connect buckle on the left side as shown
in Figure 10. You will hear a click when the tab engages
properly. Connect the right leg strap using the same
procedure. Pull the free end of the strap away from the
buckle to make a snug fit on each leg strap. To loosen the
leg strap, grasp the yellow plastic portion of the buckle
and pull away from your leg to allow the strap to pull
through the buckle. A plastic end keeper on the end of the
strap will stop it from pulling completely out of the buckle.
To release the buckle, press the silver-colored tabs on the
buckle towards each other with one hand, while pulling on
the tab portion of the buckle with the other hand.
Step 4. Attach the chest strap by inserting the tab of the buckle
into the receptor of the quick connect buckle. You will
hear a click when the tab engages properly. The chest
strap should be 6 in. (15 cm) down from the top of your
shoulders. Pass excess strap through the loop keepers.
The strap may be tightened to a snug fit by pulling the
free strap end to the left
(away from the buckle).
To loosen the chest strap,
grasp the yellow plastic
portion of the buckle and
pull away from the body
to allow the strap to pull
through the buckle. A
plastic end keeper on the
end of the strap will stop
it from pulling completely
out of the buckle. To
release the buckle, press
the silver-colored tabs on
the buckle toward each
other with one hand, while
pulling on the tab portion
of the buckle with the other
hand.
Figure 11 - ExoFit Quick Connect Buckle Connections
Chest Strap:
Attach chest strap by
inserting the tab of the buckle into
the receptor of the quick connect
buckle until a click is heard
Leg Straps:
Attach leg strap by
inserting the tab of the buckle into
the receptor of the quick connect
buckle until a click is heard
Figure 12 - ExoFit Cross-Over Style
Belt Loops
