manualshive.com logo in svg

DBI SALA 8001717, Инструкция пользователя

Поделиться
Скачать
DBI SALA 8001717 Скачать руководство пользователя страница 13

14

C. QUICK-MOUNT BRACKET: Figure 8 shows the tripod quick-mount

leg bracket 8005048 (optional on 8001717 and 8001718 models).
To install the quick-mount bracket to the tripod leg, assemble as
shown in Figure 8. Adjust bracket to desired position on the leg
and tighten bolts to 15 ft.-lbs. Do not over tighten. Do not install
quick-mount bracket onto the lower (telescoping) leg. The quick-
mount bracket must be used for connection of the Salalift® winch
(8101000 series), the Work Winch (8103000 series) and for leg
mounting of DBI/SALA Self Retracting Lifelines.

D. HEAD MOUNT PULLEYS: The 8000000 and 8000010 model

tripods come equipped with head mounted pulleys. These pulleys
should be used for mounting the line of the primary use system
over the tripod head when used in the leg mounted position. The
head mount pulleys will accommodate up to a 1/4 inch diameter
line. See Figure 8, 9, and 10.

E. SNATCH BLOCK PULLEY: Figures 8 and 10 show the optional

snatch block pulley assembly model 8003205. The snatch block is
used when more than one device is mounted to the tripod
requiring a directional pulley. The snatch block is attached to one
of the unused eye-bolts and will accommodate up to 1/4 inch
diameter line. Do not use the Salalift winch with the snatch block

Figure 8

Содержание 8001717
























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды