background image

5

E

n

g

lis

h

6

SAFETY INSTRUCTIONS 

CAUTION:

T O   R E D U C E   T H E   R I S K   O F  
E L E C T R I C A L   S H O C K ,   D O   N O T  
REMOVE THE COVER (OR BACK). NO 
USER SERVICEABLE PARTS INSIDE; 
REFER SERVICING TO QUALIFIED 
PERSONNEL.

WARNING

:

TO REDUCE THE RISK OF FIRE OR 

E L E C T R I C A L   S H O C K .   D O   N O T  
EXPOSE THIS APPARATUS TO RAIN 
OR MOISTURE.

This symbol, wherever it appears, alerts you to the presence of uninsulated 
dangerous voltage inside the enclosure - voltage that may be sufficient to constitute 
a risk of shock.

This symbol wherever it appears, alerts you to important operating and 
maintenance instructions in the accompanying literature. Read the   manual.

DETAILED SAFETY INSTRUCTIONS:

Read these instructions

All the safety and operation instructions should be read before the apparatus is operated.

Keep   these instructions

The safety and operating instructions should be retained for future reference.

Heed all warnings

All warnings on the apparatus and in the operating instructions should be adhered to

Follow all instructions:

All operation and user instructions should be followed

Water and moisture

Do not use this apparatus near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet 
basement, or near a swimming pool etc.) except expressly allowed

Cleaning

Clean only with a dry cloth. Do not use solvents, alcohol, benzene or volatile substances for cleaning 
the exterior parts.

Ventilation

Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 
The apparatus should be situated so that its location or position does not interfere with its proper 
ventilation. 

Heat

Do not install the apparatus near any heat sources such as radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce heat.

Grounding or Polarization

Do not defeat the safety purpose of the polarized or grounding/type plug. To prevent the risk of 
electrical shock, the metallic parts of the speaker must be earthed.   A polarized plug has two blades 
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The 
wide blade or the third prong are provided for your safety. When the provided plug does not fit into your 
outlet, consult an electrician for replacement of the obsolete outlet.
Speaker shall be connected to a MAINS socket outlet with a protective earthing connection.

Power Source

The apparatus should be connected to a power supply only of the type described in the operating 
instructions or as marked on the apparatus. In order not to jeopardize the safety of the speaker, it must 
only be connected to the mains using the power cable provided.
DPDT Mains Switch is used as the disconnect device located at the rear.

Power Cord Protection

Protect the power cord from being walked on or pinched particularly al plugs, convenience receptacles, 
and the point   where they exit from the apparatus.

Accessories

Only use attachments/accessories specified by the manufacturer.

"AVIS"

 

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR 

POUR PREVENIR TOUT RISQUE DE FEU 

REPLACER UN FUSIBLE 

DE MÊME CARACTERISTIQUES

CET APPAREIL DOIT ÊNTRE RELIÉ A LA TERRE

"CAUTION"

 

TO PREVENT ELECTRICAL SHOCK 

DO NOT REMOVE COVER

TO PREVENT RISK OF FIRE 

REPLACE FUSES WITH

SAME TYPE AND RATINGS 

THIS APPARATUS MUST BE EARTHED

Carts and stands 

Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the 
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid 
injury from tip-over.

Non-use Periods:

Object and Liquid Entry

Damage Requiring Service

Servicing:

IMPORTANT NOTES

This manual is to be considered an integral part of the product, and must always accompany the 
speaker when it changes ownership as a reference for correct installation and operation as well as for 
the safety regulations.

dB Technologies will not assume any responsibility for incorrect installation of the speaker.

OPERATING PRECAUTIONS

-

Do not force the amplifier incorporated in the speaker to work in overload for extended periods 

of time.

-

Never force the control elements (switches, controls, etc.).

CAUTION

-

Make sure that the speaker is positioned in a stable and secure way in order to avoid any 

dangerous conditions for persons or objects.

CONNECTION

-

For connecting the speaker, use only qualified and experienced personnel having sufficient 

technical knowledge or specific instructions for making the connections correctly and thus 
preventing electrical dangers.

-

To prevent the risk of electrical shock, the speaker must only be supplied from the mains after all 

connections have been completed.

-

Before powering up the speaker, it is advisable to re-check all the connections, making sure in 

particular that there are no short circuits.

-

The entire sound system must be designed and installed in compliance with the current 

standards and regulations regarding electrical systems.

CAUTION

-

To prevent inductive phenomena from giving rise to hum or disturbance which would jeopardize 

efficient speaker operation, the cables that transmit microphone signals or line level signals 
(e.g. 0 dB/V) must be screened and should not be run in the vicinity of:
1)

Equipment that produces strong magnetic fields (e.g. large power supply transformers)

2)

Electrical energy conductors

3)

Lines that supply speakers.

PROTECTION SYSTEM

The speaker is equipped of a exclusive system, which protects the loudspeakers against overheating, 
ensuring the maximum reliability in all professional applications. In addition, a sophisticated system 
incorporated in the amplifier handles the limiter circuits and the protection against overheating and 
short circuits.

Unplug this apparatus during lightning storms or   when unused for long periods of time.

Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through 
openings.

Refer all servicing to qualified service personnel. Servicing is required when:
-

the apparatus has been damaged in any way;

the power-supply cord or the plug has been damaged; 

-

the liquid had been spilled or objects have fallen into the apparatus;

the apparatus has been exposed to rain or moisture

the apparatus does not operate normally or exhibits a marked change in performance;

the apparatus had been dropped.

The user should not attempt to service the apparatus beyond that is described in the Operating 
Instructions.   All other servicing should be referred to qualified service personnel.

CAUTION

E

n

g

lis

h

Содержание Stage Monitor M12-4 PLUS














Отзывы: