29
Cod. 420120298 REV. 1.0
VIO X205
5. FIRST TROUBLESHOOTING
1. Check that power supply is present upstream of the installation.
2. Ensure that the power supply cable is properly plugged in.
1. Check that the input connection of the audio signal is correctly performed.
2. Check the cables for damage.
3. Ensure that the mixer or audio source is on and an output signal is present.
4. Check that the input level is appropriate.
The loudspeaker will not turn on:
The speaker turns on but produces no sound:
1.
Re-check the project, the installation and configuration specifications using DBTECHNOLOGIES
COMPOSER.
2. Verify that the DSP PRESET parameters are actually replicated on the control panel of the module
(especially if the remote control of the modules is not used).
3. Check that, in case of RDNet network connection and control with AURORA NET, all the parameters,
especially the equalization ones, are properly set.
The speaker turns on but produces no sound:
