28
VIO W15T
Cod. 420120335 REV. 1.0
2.2. CONFIGURATION AND REMOTE CONTROL
The AURORA NET software allows you to manage in real time several parameters of the VIO W15T monitor. In
particular:
•
Monitor both the main input and output signals as well as the signal on both acoustic
components
•
View the presence of audio compression on the acoustic components
•
Attenuate the input signal in steps of 0.5 dB
•
Add filters to adapt the frequency response of the stage monitor to your requirements
•
Adjust the gain and add delay
•
Select the cut-off frequency to apply to the high-pass filter with preset values ranging from 55
to 120 Hz
•
MUTE the main channel as well as the individual woofer and driver channels
•
Listen to the stage monitor in SOLO mode, or to each of the woofer and driver channels
•
Monitor the temperature of the amplifier and the power supply unit
•
Save the settings made using AURORA NET to the DSP of stage monitor for subsequent recall
by pressing the
DSP Preset
button on the control panel (
Service/User
mode)
For further information, refer to the specific manual for the AURORA NET software.
English
