DVB-T/T2 terrestrial receiver
MERlin
2013 dB Broadcast Ltd
50
Version 1.2
Specification
RF input
Tuning Range:
178 to 858 MHz
Tuning Step
125kHz 7MHz channel
166.7kHz 8MHz channel
Input Level:
-20dBm to 80dBm
Input Return Loss:
6dB typical.
Input Impedance:
50
Ω N Type
DC voltage on input
+5V maximum
Supported Modes
DVB-T2
All single PLP (Mode A) modes defined within DVB-
T2 specification EN302755 supported.
Modulation
Guard Interval
1/4, 19/128, 1/8, 1/32, 1/128
Code Rate
1/2, 2/3, 3/4, 5/6, 7/8
Modulation
QPSK, 16, 64, 256 QAM
FFT
1K, 2K, 4K, 8K, 16K, 32K
Measured Parameters
DVB-T2 Template
T2 Frames per superframe, FEC block Length,
Constellation of L1 Post signalling, Carriers,
Constellation (of PLP), Tone Reservation, Scattered
Pilot pattern, Guard Interval, Data symbols per T2
frame, FEC blocks per interleaving frame, Time
interleaving blocks per DVB- T2 frame.
General
L1 signalling information, input RF level, receiver
lock status, MER, LDPC error ratio, LDPC iterations,
frequency error, TS bit rate.
ASI Output
Connector:
2
x 75Ω BNC
ASI format:
Burst mode
Power
Input Voltage:
100-240 VAC
60/50Hz
50W Max
Fuse
T2AH 250V
Physical
Dimensions Height:
1RU (1.75 inches)
Width:
483 mm (19 inches)
Depth:
320 mm (12.6 inches) (not including rear panel)
Net Weight:
2.40 kg (5.25 pounds)