Dazzle ZiO! Hi-Speed Portable Reader/Writer User’s Guide • Using the Reader/Writer • Page 22
Inserting a CompactFlash Card
Before you inser t a CompactFlash card in the ZiO HS Reader/Writer, position the unit with
the Access Indicator on top, as shown below. Then flip its protective ring to the open
position to uncover the USB connector and the card slot and conver t the ring to a stand,
as described in
“Hardware Over view” on page 7
To inser t a CompactFlash card, follow these steps:
1.
Position the CompactFlash card in the direction shown in the illustration below.
2.
Insert the card with the connectors facing in and the manufacturer’s label on top.
Make sure you position the card properly. All CompactFlash card manufacturers adhere
to a specification that requires a positive keying of the card.
Caution:
Be careful not to inser t the CompactFlash card in the wrong direction.
Make sure the connectors are facing in (with the manufacturer’s label on top) and the
card is not inserted upside down.
3.
Gently push the card all the way into the slot until it locks in place.
The card slides in on the molded rails and you should feel a slight amount of
resistance as the connectors make contact.
Important:
If excessive force is required or the card just doesn’t seem to fit, do not
force the card in the ZiO HS Reader/Writer. Contact the Dazzle Technical Resource
Center for assistance.
128
MB
Digital FlashFilm
facing in
Connectors
Access Indicator (on top)
