RE-1100cc Double-seat buggy Owner’s Manual Version: 3.0 Dec. 2006
46
After starting the engine, shift the gearshift lever from neutral to 1st gear by stepping on the clutch, release brake
handle lever, then step on the accelerator and start to drive
。
When you are starting the buggy at a slope, do not release the brake handle lever until you
have already shift the gearshift lever to 1
st
gear and ready to move the vehicle. Step slightly
on the accelerator pedal and then release the brake handle lever.
[D] GEARSHIFT OPERATING INSTRUCTIOIN
Whenever you need to change gear, always step on the clutch fully and
shift the gear to the desired position at the same time. After changing
gear, let go the clutch slowly and step on the throttle pedal
。
Step on the clutch fully